Colorbond Fencing in Joondalup, WA
Perth and surrounding suburbs

Colorbond fencing built for Perth conditions

Perth is hard on fences, and it is hard on them in specific ways. Most of the coastal plain is sand over limestone. It digs easily and gives a post almost nothing to hold onto unless the hole is deep enough and properly concreted. Head east toward the hills and the ground turns to clay, which holds water and moves. Neither is forgiving of a shallow footing.

Then there is the air. Anywhere west of the freeway is dealing with salt carried in off the coast, and it goes to work on cheap fixings long before it touches the sheeting. Summer heat dries timber out until the palings cup and drop. Termites are a live problem right across the sand belt, and they do not eat steel.

We build for the block in front of us. Posts set at a depth that suits the soil, coastal-grade fittings anywhere near the coast, and rails run level rather than following a lumpy grade.

Who you are actually dealing with

Colorbond Fence Perth is the Colorbond arm of WA Fencing and Retaining, who have been fencing in Perth since 2007. Licensed and insured. The fencer who quotes your job is the one who measures it — he walks the run himself, tells you what he would do and what he would not bother with, and puts a fixed number in writing. If the job needs the old fence pulled out first, or the ground stepped, that is in the quote too, not sprung on you halfway through.

More about how we work →

More about us
Colorbond Fence Perth Colorbond Fencing

Where we work

Across the Perth metropolitan area, from the northern corridor down through the central suburbs and out east. Most of our Colorbond work sits in Perth’s northern suburbs, and these are the areas we cover most often.

If you are outside that ring, ask anyway. We cover most of Perth and will tell you straight away if a job is too far out rather than waste your time.

What else we do in Colorbond

New Colorbond fencing is the main job and it is what the rest of this site covers. Three related pieces of work come up often enough to be worth their own page.

Colorbond Gates

Single, double and sliding gates matched to the fence and hung on hardware rated for the weight, so they still close properly in five years.

Fence Repairs and Replacement

Storm damage, leaning posts, dented or blown-out sheets. Repaired where repair makes sense, replaced where it does not.

Boundary Fencing

Dividing fences between neighbours, quoted clearly so the cost-sharing conversation under the Dividing Fences Act is a short one.

Everything else

Retaining walls, limestone, pool fencing, aluminium slat and commercial work go to the same crew at WA Fencing and Retaining. Same number.

Colorbond Fence Perth Colorbond Fencing

Why Choose Colorbond Fence Perth?

Free on-site measure, not a phone guess

Someone comes out, walks the run, checks the fall and the access, and measures it. A number over the phone is a number that changes later.

Fixed written price

The quote covers removal of the old fence, the dig, the concrete, the sheeting and the clean-up. What you sign is what you pay.

Coastal-grade fittings as standard

Within a few kilometres of the beach, standard fixings are the first thing to go. We spec for salt on every job in this patch, not just the ones with a sea view.

Call any hour

Ring at 6am or 11pm — the phone gets answered, your details get taken, and a fencer calls you back. Tradies and shift workers do not keep office hours and neither does our phone.

What Colorbond fencing actually is

Colorbond is a steel fencing product made by BlueScope. The sheets are roll-formed from zinc and aluminium coated steel with a baked-on paint finish, and a finished fence is three parts: posts set in concrete, horizontal rails spanning between them, and the vertical panels that clip into the rails. Nothing rots, nothing needs painting, and there is no timber in it for termites to find — which matters more in Perth's sand belt than most people realise.

Here is the part the fencing industry is quiet about: the materials barely vary. Every fencing contractor in this city buys the same panels from the same suppliers. What separates a fence that stands straight for twenty years from one that leans in three is post depth, the quality of the concrete work, and whether the rails were run level or allowed to follow a lumpy grade. That is workmanship, not product choice, and it is where our attention goes.

Styles, heights and finishes

The Colorbond range is wider than most homeowners expect. These are the choices that come up at nearly every measure.

Heights

Standard residential fencing runs 1.5m, 1.8m and 2.1m. Across Perth almost every side and rear boundary goes in at 1.8m. Front boundaries are restricted by your setback and your council's requirements, so that one gets checked before it gets quoted.

Colours

The full Colorbond fencing range. Monument, Basalt, Woodland Grey and Surfmist are the four that come up most often on this side of the city. We bring the samples to the measure — colour looks different against your brickwork in daylight than it does on a screen.

Lattice and slat toppings

An extra 300mm of height and a bit of filtered light rather than a solid wall of steel. Common on front boundaries and around alfresco areas where you want privacy without the fence feeling like a barrier.

Plinths and stepping

Where the ground falls away you either step the fence down in sections or close the gap with a plinth at the base. Skip it and you get a gap underneath — which lets dogs out, lets sand wash through, and looks unfinished. Woodvale and the older Kingsley blocks need this more often than not.

Gates are worth planning at the same time rather than as an afterthought. Colorbond gates in the same colour and profile, hung on hardware rated for the weight, are the difference between a gate that still closes properly in five years and one that drops on its hinges by the second summer.

How long it lasts, and what it needs from you

A properly installed Colorbond fence is a twenty-year piece of infrastructure, and the maintenance it asks for is close to nothing — hose it down occasionally, more often within a few kilometres of the coast, and that is genuinely the list. No oiling, no repainting, no replacing split palings every few seasons.

What it is protecting against here is specific. Perth summers dry timber out until the palings cup and drop. Termites are a live problem across the sand belt and they do not eat steel. Winter storms take out fences that were never concreted deep enough in the first place, which is why storm season is our busiest period for repairs — and almost always on fences somebody else put in cheaply.

On warranty: the steel and its coating are covered by BlueScope, not by us, and the terms depend on the product and how far you are from surf. Ask us at the measure and we will tell you what applies to your job rather than quoting you a headline number. Our own responsibility is the installation, and we stand behind that.

How the job runs

Four steps, from the first phone call to a clean verge. No surprises in the middle.

1. Free on-site measure

A fencer comes to the property, walks the run, checks the fall and the access, and measures it properly. Not a guess over the phone. Book it through the estimate form or ring any hour.

2. Fixed price in writing

Materials, height, length, gates, removal and disposal of the old fence, and the clean-up. One number, with a start date. If it is a shared boundary you get a written quote you can show the neighbour, which makes that conversation considerably shorter.

3. Install

Most straight residential runs are one to two days on site. Stepped ground, long runs or an old fence coming out first adds time, and you are told that up front rather than on the day.

4. Clean-up

Old fence gone, offcuts gone, verge swept. The site is left the way you would want to find it, and that is part of the quoted price rather than an extra.

Colorbond colours, and which ones actually work here

The Colorbond fencing range runs to eleven standard colours: Basalt, Monument, Woodland Grey, Windspray, Surfmist, Paperbark, Dune, Jasper, Cottage Green, Ironstone and Wallaby. All of them are available on any job we quote anywhere in Perth.

Four of them do most of the work around here. Monument and Basalt are everywhere in the newer estates and look sharp against rendered brick. Woodland Grey sits more quietly and hides marks better. Surfmist suits the older cream and limestone homes through Heathridge and Kingsley without shouting.

One thing worth knowing before you pick a dark colour. Monument and Basalt get genuinely hot to touch on a west-facing boundary in February. If you have small children, a dog that leans on the fence, or the run passes close to a pool area, that is worth five seconds of thought.

We bring the full colour range to the measure. Steel reads differently against your own brickwork in daylight than it does on a screen, and it is a twenty-year decision.

Fencing rules across Perth councils

Most residential fencing in Perth does not need an application, but the rules are set by your local council and they are not identical. Stirling, Joondalup, Wanneroo, Bayswater and Melville each take a different line on front boundaries, and it is cheaper to check before the posts go in than after.

Side and rear boundaries

Generally straightforward at standard heights. This is where most Colorbond goes and it is rarely the part that causes trouble.

Front boundaries

Where the restrictions bite. Height limits, how solid the fence can be, and sight lines where your driveway meets the verge. These vary by street and by your setback.

Dividing fences

Under the Dividing Fences Act 1961 (WA), adjoining owners are generally each liable for half the cost of a sufficient dividing fence. Want better than standard, you cover the difference.

Retaining and fill

Fencing on top of a retaining wall, or where fill has changed the ground level, is treated differently again. Common on the split-level blocks through Woodvale and Ocean Reef.

We check what applies to your address as part of quoting rather than leaving it with you.

Colorbond compared with timber and aluminium

Three materials come up on nearly every quote in Perth. The honest comparison:

Colorbond steel

Mid-range on price. No painting, no rot, nothing for termites. Twenty-year lifespan with almost no maintenance. Privacy is total, which some people want and some do not.

Timber

Cheaper on day one and dearer by year ten. Perth summers dry it out, palings cup and split, and the sand belt has a live termite problem.

Aluminium slat

The best-looking of the three and the dearest. Light passes through, so it suits front boundaries and pool surrounds where solid steel would feel heavy.

Which we would pick

Colorbond for side and rear boundaries, every time. Aluminium slat for a front fence you look at daily. Timber only if you actively want the look and accept the upkeep.

Steel is also fully recyclable at end of life, which preservative-treated timber is not.

Gates, repairs and the rest of it

This site is deliberately about Colorbond fencing in Perth and nothing else. That is not the limit of what the team does, it is just what this site is for.

Colorbond gates to match the fence, fence repairs after a storm, leaning posts, blown-out sheets, boundary and dividing fence work, retaining walls, limestone, pool fencing, aluminium slat and commercial fencing all go to the same crew at WA Fencing and Retaining. Ring (08) 7666 0073 and it goes to the right person.

If your job is a fence plus a gate, or a fence sitting on a wall, quote it as one job.

What actually drives the price of a Colorbond fence

We do not publish a per-metre rate, and you should be wary of anyone who does. The honest range is wide enough to be useless as a number, and a price quoted over the phone is a price that changes once someone sees the block. What we can do is tell you exactly what moves it, so you can read any quote you get, ours or anyone else's.

Length and height

The two obvious ones. Metres of run, and whether it is 1.5m, 1.8m or 2.1m. Going from 1.8m to 2.1m costs more than most people expect, because the posts go deeper as well as taller.

Fall in the ground

A flat run is the cheap version. Sloping ground needs stepping or plinths, which is more material and considerably more labour. This is the single biggest reason two quotes for the same length differ.

The old fence

Removal, disposal and tip fees. Timber with concrete footings costs more to take out than a sheet fence. Ours is quoted inclusive. Check whether the other quote is.

Access

Whether a machine can reach the line or everything goes by barrow through a 900mm side gate. Rear boundaries on battleaxe blocks are the usual culprit.

Soil and post depth

Sand over limestone means deeper holes and more concrete. It is where a cheap quote saves money, and where a fence starts leaning three summers later.

Gates and extras

Gates, lattice or slat toppings, and any fencing that sits on a retaining wall. Each is priced separately and each should be itemised.

When you compare quotes, compare what is in them. A cheaper number that excludes removal, disposal and clean-up is not cheaper. Ask for it in writing with a start date, which is what you get from us. Book a free measure and you will have a fixed figure to hold the others against.

How to choose a fencing contractor in Perth

Fencing has a low barrier to entry, and the difference between good and bad work does not show for about three years. By then the cheap crew is long gone. Six questions worth asking whoever you are talking to.

How deep do the posts go, and is every one concreted?

The most useful question you can ask. Perth sand gives a post nothing to hold. Shallow footings are the number one cause of an early lean, and it is invisible once the job is finished.

Are removal and disposal included?

Get it in the quote, not in conversation. Tip fees appearing at the end is a common and entirely avoidable argument.

Is the quote fixed, written, and dated?

A verbal estimate is not a quote. Anything that could move should be named before you agree to it, not discovered during.

Are you licensed and insured?

Ask directly and expect a straight answer. Work on a shared boundary makes this more than paperwork.

What fittings do you use near the coast?

Within a few kilometres of the beach, standard fixings fail long before the sheeting does. A contractor with no view on this in Ocean Reef or Currambine is telling you something.

Who actually turns up?

Whether the person quoting is the person building, or whether it goes to whichever subcontractor is free that week.

Hold us to the same six. The fencer who quotes your job is the one who measures it, the price is fixed and in writing, removal and clean-up are in it, and coastal-grade hardware is standard across this whole service area rather than an upsell.

What People Ask Us

How much does a Colorbond fence cost in Perth?

It depends on height, length, how much fall is in the ground and whether an old fence has to come out first. That is exactly why we measure on site rather than quote blind. The measure is free and the price we give you afterwards is fixed.

Do I need to talk to my neighbour first?

For a boundary fence, yes. In WA, dividing fences fall under the Dividing Fences Act 1961, and the usual arrangement is that both owners share the cost of a sufficient fence. We can give you a written quote to show them, which makes that conversation a lot shorter.

What heights can I get?

Standard Colorbond fencing runs 1.5m, 1.8m and 2.1m. Most boundary fencing around Perth goes in at 1.8m. Front fencing is more restricted, and the limits vary with your setback and your local council rules, so it is worth checking before you commit.

Which colours do you carry?

The full Colorbond fencing range. Around here Monument, Basalt, Woodland Grey and Surfmist come up most often. We bring samples to the measure so you can hold them against the house rather than guess off a screen.

Read all the common questions →

Will the sea air wreck it?

The steel itself is built for it. What fails first on a cheap coastal fence is the fittings and the fixings. We use coastal-grade hardware as standard across this whole service area, which is the part that actually decides how long the fence lasts.

How long does a typical job take?

Most straight residential runs are a one to two day job once we are on site. Steep or stepped ground, or a fence that has to come out first, adds time. We give you the timeframe with the quote.

Who actually installs the fence?

The team from WA Fencing and Retaining, who have been working across Perth since 2007 and are licensed and insured. This site is their Colorbond arm for Perth. The fencer who quotes your job is the one who measures it — you are not handed to a subcontractor after you sign.

Is there a warranty on Colorbond fencing?

The steel and its paint finish carry BlueScope's manufacturer warranty, and the terms vary with the product and how close the property sits to the coast. We will tell you exactly what applies to your job at the measure. Our installation is our own responsibility and we stand behind it.

Do I need council approval for a fence in Perth?

Side and rear boundary fencing at standard heights generally does not need approval. Front fencing is where the rules bite — height limits, sight lines at driveways and setback requirements all vary by council and by street. We check before quoting rather than after building.

Why choose Colorbond over timber or aluminium?

Timber is cheaper up front and more expensive over twenty years once you count repainting, warping and termite damage. Aluminium slat fencing looks sharper and costs more. Colorbond sits in the middle and is why most new and replacement boundaries across Perth end up being steel.

Do you do pool fencing or aluminium slat?

Not through this site — we keep it to Colorbond so we do it properly. WA Fencing and Retaining handles pool fencing, aluminium slat, limestone retaining walls and commercial work. Ring the same number and we will pass it to the right crew.

How do I get a price?

Send the address and a rough idea of the run through the estimate form, or call (08) 7666 0073 at any hour. We will arrange a time, measure it on site and put a fixed written price in your hand. Free, with nothing attached to it.

What colours does Colorbond fencing come in?

Eleven standard colours: Basalt, Monument, Woodland Grey, Windspray, Surfmist, Paperbark, Dune, Jasper, Cottage Green, Ironstone and Wallaby. We bring the full range to the measure.

Is Colorbond fencing recyclable?

Yes. Steel is fully recyclable at end of life, which preservative-treated timber is not.

Do you do fence repairs as well?

Yes, through WA Fencing and Retaining on the same number. This site focuses on new Colorbond fencing, but the crew is the same.

How often do I need to repaint a Colorbond fence?

Never. The colour is a baked-on finish over the steel, not a coat of paint sitting on top. That is the main practical difference from timber, which needs oiling or repainting on a cycle for its whole life.

Who manufactures Colorbond?

BlueScope, an Australian steel manufacturer. Every fencing contractor in Perth buys the same sheets, so what differs between quotes is the installation, not the steel.

How do I compare two fencing quotes properly?

Compare what is included, not just the number. Removal and disposal of the old fence, the clean-up, post depth, gates, and any stepping or plinths on sloping ground. A lower figure that leaves those out is not actually lower.

Can my Colorbond fence count as a pool barrier?

Sometimes, as part of one. Where a pool sits near a boundary, a 1.8m Colorbond fence can form a side of the barrier provided the non-climbable zone is clear on the pool side and there is nothing to climb near it. The rest of the barrier still has to comply, and that is usually glass or tubular aluminium rather than Colorbond. We will tell you at the measure whether your boundary run can do the job, and WA Fencing and Retaining handles the pool fencing itself.

Colorbond Fence Perth Colorbond Fencing

Contact Us Today for a Free Estimate

Send us the address and a rough idea of the run. We will come out, measure it properly and send you a fixed price.

Call (08) 7666 0073

Free — no obligations